상품중이미지 썸네일
부가이미지 썸네일

IXXAT CAN@net NT420

1,101,100 부가세포함

수량
총 금액

CAN@net NT 420

4 x CAN (2 x CAN FD)
CAN-Ethernet gateway, bridge and PC interface 

The CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD. All devices offer three operation modes and can be used as a PC interface as bridge and gateway.

FEATURES AND BENEFITS

FEATURES

  • Four independent CAN channels (2 CAN FD channels)
  • Powerful filter, ID translation, data mapping and multiplexing functionality
  • MQTT support for an easy cloud connection (publisher and subscriber)
  • Execution of pre-defined actions using event-triggered "Action Rules"
  • Programming of any kind of action rules using LUA
  • Windows configuration tool for easy configuration via USB or Ethernet
  • Configurable security levels for device access (configuration or firmware upload)
  • Designed for high performance in industrial environments

BENEFITS

  • Easy coupling of CAN and CAN-FD systems and devices
  • Bridging of large distances and easy remote system access using Ethernet
  • Cost savings due to simple wiring
  • Allows system expansion and tree/star topologies
  • Increased system reliability
  • Line protection by galvanic isolation

TECHNICAL SPECIFICATIONS

Ethernet interface10/100 MBit/s, twisted pair, RJ45 connector
CAN transceiverTexas Instruments SN65HVD251P
CAN channelsCAN@net NT 420: 4 x CAN (two of them with CAN FD)
CAN connectionCAN@net NT 420: Screw connector
Max. number of bus nodes120
CAN bus termination resistorNone
CAN baudratesStandard CAN: 5 to 1000 kBit/s, CAN-FD: 5 to 8000 kBit/s
Power supply9 V to 36 V DC
Current consumptiontypically 110 mA (at 24 V input voltage) or 230 mA (at 12 V input voltage) 
Temperature rangeOperating temperature -40 °C to +85 °C, Storage temperature -40 °C to +85 °C
Galvanic isolation1 kV for 1 sec.
CertificationCE, FCC, UL
HousingPolyamide housing for top hat rail mounting
Protection classIP20
Sizeapprox. 114.5 x 99 x 22.5 mm
Weightapprox. 150 g

CONTENTS OF DELIVERY

  • CAN@net NT 100, CAN@net NT 200 or CAN@net NT 420
  • User manual
  • CD with CAN Gateway Configurator
  • CAN VCI driver for Windows
  • Mini USB cable

CONFIGURATION

The configuration of the new CAN@net NT and the firmware upload is done with an intuitive to operate Windows configuration tool - via USB or Ethernet. With the tool, the configuration of filter, mapping, multiplexer or translation rules can be carried out very easily, without programming skills.

 

CANatNet NT & CANbridge NT Tool
Windows configuration tool supporting CANbridge NT and CAN@net NT

HOW IT WORKS

OPERATION MODES

CAN-Ethernet Gateway
In gateway mode the CAN@net NT can be directly accessed from e.g. Windows, Linux, VxWorks or QNX based systems as well as from embedded systems, by using a simple ASCII protocol over a standard TCP/IP socket. As CAN-Ethernet Gateway, the CAN@net NT offers easy, flexible access to four independent CAN systems (two CAN FD) via a LAN or via the Internet.

PC Interface
With the included VCI driver for Windows, the CAN@net NT can be operated like all Ixxat CAN PC interfaces. With the CAN@net NT, all VCI-based Ixxat tools, such as the canAnalyser, as well as customer-specific applications based on the VCI driver can be used. The VCI CAN driver offers the possibility to communicate with up to 128 CAN@net NT devices at the same time.

 

 CAN-at-net NT 420 in PC or Gateway Mode

 

CAN-Ethernet-CAN Bridge
By using up to four CAN@net NT 420 (two CAN@net NT 100/200), a CAN-Ethernet-CAN bridge can be implemented, with each up to four independent CAN channels (2 for the CAN@net NT 200, 1 for the CAN@net NT 100) per device. The bridge allows the exchange of CAN messages between CAN systems over long distances via TCP/IP, using existing Ethernet infrastructures. The segmentation of CAN systems also increases the reliability and failure safety of the entire system.

CAN-at-net NT 420 Bridge

FUNCTIONS

Filtering and multiplexing
With the help of mapping tables, the exchange of messages between all channels can be configured very flexibly. Filter and conversion rules can be applied to the CAN and CAN FD messages. As a result, the bus load in the individual networks can be reduced since only relevant messages are transmitted to the other network. For SAE J1939 applications a special mapping table is provided, adapted to the specific parameters. The data multiplexing/demultiplexing functionality enables the mapping of e.g. CAN-FD data to several standard CAN messages and vice versa. 

Action Rules
In response to received messages, device or CAN bus status events, a variety of actions can be performed automatically, e.g. sending messages (CAN, CAN FD, MQTT), changing device settings or switching device LEDs. Action rules are created through intuitive drop-down menus for events and actions within the Windows-based device configuration tool or by using LUA scripts.

MQTT for cloud connection
Whether device status or CAN/CAN FD data, the MQTT functionality of the CAN@net NT enables transmission of various information to the cloud – easily programmable using action rule lists. With free available broker services and APPs, e.g. status messages or system values can be easily transmitted to your smartphone or other devices.

Cyclic transmission
The cyclic transmission feature enables cyclic forwarding of messages. Both, messages and  cycle times are defined within a central cyclic transmission table.

제조사 : IXXAT (독일)

 

납기 : 주문 후 3~4주.

 

AS 방침 : 유상 



번호 제목 답변여부 작성자 작성일
등록된 상품 문의가 없습니다.
반품/교환 안내

- 반품불가 표시된 상품 또는 해외 수입 제품은 제품의 불량 이외의 어떠한 사유로도 교환이나 반품이 되지 않습니다.

- 제품 특성상 고객님께서 제품을 충분히 확인하시고 주문하셔야 합니다. 쇼핑몰의 사진이나 설명은 단순 참고용 입니다.

- 해외 수입 제품이 아닌 경우 단순변심, 주문오류 등에 의한 반품 및 교환은 상품 수령일로 부터 7일 이내에 미개봉, 미사용, 미설치 된 제품에 한하여 교환이 가능합니다.

- 단순변심에 의한 반품 및 교환의 경우, 반품 및 교환을 위하여 추가로 발생되는 운임은 고객님 부담입니다.

- 배송박스가 훼손 되었거나, 제품이 파손된 경우 배송한 택배기사에게 즉시 알리고, 사진(파손부분, 송장부분)을 찍어 고객센터로 보내 주시기 바랍니다.

- 배달된 상품이 파손 되었거나, 기능상 불량, 하자가 있을 경우 상품수령일로 부터 7일 이내에 고객센터에 접수해 주시기 바랍니다.


배송 안내

- 결재금액이 5만원 미만은 배송비가 3,000원이며, 5만원 이상은 배송비가 무료입니다.

- 재고상품의 경우 주문 후 평균 2~3일내 (토요일, 공휴일 제외) 수령 가능하며, 택배사의 사정에 따라 다소 지연될 수 있습니다.

- 주문상품의 경우 평균 1~2주 기간이 소요 됩니다.

- 오후 3시 이후 입금 확인건은 다음날 주문 처리 됩니다.