상품중이미지 썸네일
부가이미지 썸네일

PEAK PCAN-Wireless Gateway

495,000 부가세포함

CAN to WLAN-Gateway

수량
총 금액

PCAN-Wireless Gateway

CAN to WLAN-Gateway


The PCAN-Wireless Gateway allows the connection of different CAN busses over IP networks. CAN frames are wrapped in TCP or UDP message packets and then forwarded via the IP network from one device to another. The PCAN-Wireless Gateway provides one WLAN connection and two High-speed CAN interfaces. The module is supplied in a plastic case with two D-Sub connectors or a Tyco automotive connector.

The PCAN-Gateway product family is configured via a convenient web interface. Alternatively, the JSON interface allows access via software. Both options provide status information and settings of the devices, the various communication interfaces, message forwarding, and filters.

Technical Specifications

  • ARM9 Freescale iMX257 with 16 kByte Level 1 Cache and 128 kByte internal SRAM
  • 256 MByte NAND Flash and 64 MByte DDR2 RAM
  • Linux operating system (version 2.6.31)
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1) or via automotive connector, 12-pin (Tyco)
  • Wake-up function using CAN bus or separate input
  • Monitoring and configuration of the devices via the web interface or JSON interface
  • Reboot and reset of the device to factory defaults with a reset button
  • Plastic casing with flange, dimensions: 130 x 110 mm
  • LEDs for device status, WLAN, and power supply
  • Voltage supply from 8 to 30 V
  • 5-Volt supply to the CAN connection through a solder jumper, e.g. for external bus converter (only for IPEH-004020)
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Wireless properties

  • WLAN IEEE 802.11 b/g
  • Internal chip antenna
  • Data transmission using TCP or UDP

CAN properties

  • Two High-speed CAN channels (ISO 11898-2)
  • Bit rates from 40 kbit/s up to 1 Mbit/s
  • TJA1041 CAN transceiver
  • Compliant with CAN specifications 2.0A and 2.0B

With the PCAN-Gateways, CAN busses can be connected via LAN or WLAN. CAN frames are wrapped into TCP or UDP message packets and then forwarded from one device to another. Based on this technology, it is possible to connect CAN networks over a great distance.

The configuration of the PCAN-Gateway product family is done via a convenient web interface. For this, the device must be connected to the PC via LAN or WLAN, depending on the used model. The web interface can be opened with a common browser. After a successful login you get access to all information and the configuration of the device settings, communication interfaces, message forwarding, and filters.

Alternatively, the JSON interface is available for access. This allows the development of software to automatically monitor and configure all devices connected to the IP network.

Functions of the web interface:

  • Clear presentation of information about device settings, communication interfaces, message forwarding, and filters
  • Definition of the public visibility of status information
  • Import and export of device configurations
  • Reset of the device configuration to factory defaults
  • Comfortable software updates
  • Scan of the IP network for further available PCAN-Gateways for an easier establishment of routes
  • Layout automatically adjusts for mobile devices
  • Rebooting the device via the website
  • Enabling, disabling, and configuration of the JSON interface
  • Integrated help pages

CAN channels settings:

  • Selection of bit rates up to 1 Mbit/s from a preset list
  • Setup of user defined bit rates via register values
  • Status switching of the listen-only mode

LAN interface settings (if available):

  • Automatic or manual setup of the device‘s IP address (IPv4) and the subnet mask

WLAN interface settings (if available):

  • Set the WLAN operating mode to Infrastructure (Client), Ad-Hoc, or Access Point
  • Automatic or manual setup of the device‘s IP address (IPv4) and the subnet mask
  • Connection to the wireless network
  • Configuration of the network encryption

Setup and management of the message forwarding:

  • Setup of the message forwarding between a CAN channel and LAN/WLAN (or vice versa)
  • Selection of the participating CAN channel
  • Definition of the LAN/WLAN station according to the IP address and the port
  • Selection of the transfer protocol TCP or UDP
  • Enabling, disabling, and editing of existing routes
  • Disabling the PCAN-Gateway Handshake to allow the connection to other devices

Properties of the message filtering:

  • Creating and managing filters via a new section of the web interface
  • Creating Filters with different options:
    • Filtering messages with 11-bit or 29-bit IDs
    • Support of range and mask filters
    • Optional inversion of the filter range
  • Assigning a filter to multiple routes

Functions of the JSON interface:

  • Receiving of a request as a JSON-formatted GET parameter of an HTTP request
  • Returning of the response in JSON format
  • Reading out authorized information about device settings, communication interfaces, message forwarding, and filters
  • Configuration of settings as well as adding and deleting message forwarding and filters (function is deactivated at delivery)
  • Alternative access to the JSON interface via an emulated shell view with integrated documentation for an easy start
  • PCAN-Wireless Gateway in plastic casing
  • IPEH-004020: Mating connector for voltage supply
  • IPEH-004020-A: Tyco mating connector including crimp contacts
  • Manual in PDF format
  • Printed quick start guide

제조사 : PEAK-System Technik GmbH (독일)

 

납기 : 약 5 ~ 10 일

 

AS 방침 : 구입 후 1년간 무상 (단, 사용자 과실의 경우 실비 청구), 1년 후 유상 


  •  

번호 제목 답변여부 작성자 작성일
등록된 상품 문의가 없습니다.
반품/교환 안내

- 반품불가 표시된 상품 또는 해외 수입 제품은 제품의 불량 이외의 어떠한 사유로도 교환이나 반품이 되지 않습니다.

- 제품 특성상 고객님께서 제품을 충분히 확인하시고 주문하셔야 합니다. 쇼핑몰의 사진이나 설명은 단순 참고용 입니다.

- 해외 수입 제품이 아닌 경우 단순변심, 주문오류 등에 의한 반품 및 교환은 상품 수령일로 부터 7일 이내에 미개봉, 미사용, 미설치 된 제품에 한하여 교환이 가능합니다.

- 단순변심에 의한 반품 및 교환의 경우, 반품 및 교환을 위하여 추가로 발생되는 운임은 고객님 부담입니다.

- 배송박스가 훼손 되었거나, 제품이 파손된 경우 배송한 택배기사에게 즉시 알리고, 사진(파손부분, 송장부분)을 찍어 고객센터로 보내 주시기 바랍니다.

- 배달된 상품이 파손 되었거나, 기능상 불량, 하자가 있을 경우 상품수령일로 부터 7일 이내에 고객센터에 접수해 주시기 바랍니다.


배송 안내

- 결재금액이 5만원 미만은 배송비가 3,000원이며, 5만원 이상은 배송비가 무료입니다.

- 재고상품의 경우 주문 후 평균 2~3일내 (토요일, 공휴일 제외) 수령 가능하며, 택배사의 사정에 따라 다소 지연될 수 있습니다.

- 주문상품의 경우 평균 1~2주 기간이 소요 됩니다.

- 오후 3시 이후 입금 확인건은 다음날 주문 처리 됩니다.