The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod motherboards.
The Digital 1 & 2 motherboards serve general digital requirements.
The configuration requires a PEAK CAN interface.
High-speed CAN connection (ISO 11898-2)
Bit rates from 10 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Completely configurable using the Windows® software PCAN-MicroMod Configuration
Operating voltage 8 to 26 V
Status LEDs for power supply and digital output
Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
8 digital inputs:
Pull-up or Pull-down circuit selectable in groups (3 groups)
Schmitt trigger behavior, inverting
Threshold High = 4.8 V, Low = 1.2 V
Low pass behaviour
Parallel connection of frequency inputs at 4 digital inputs for alternative use (e.g. on rapid state changes, counting)
5 digital outputs:
PCAN-MicroMod Digital 1: 4 Low-side switch, max. 45 V, 0.35 A
PCAN-MicroMod Digital 2: 4 High-side switch, max. 26 V, 1.1 A
1 fast Low-side switch, max. 55 V, 0.75 A, max. 10 kHz („frequency output“)
제조사 : PEAK-System Technik GmbH (독일)
납기 : 약 5 ~ 10 일
AS 방침 : 구입 후 1년간 무상 (단, 사용자 과실의 경우 실비 청구), 1년 후 유상