A bi-directional physical layer converter between 100BASE-T1 (OPEN Alliance BroadR-Reach – OABR) and 100BASE-TX (Fast Ethernet), enabling the user to easily connect Automotive Ethernet cameras or ECUs with OABR media link to a standard computer network.
The interface establishes a point-to-point link between an unshielded twisted-pair Automotive Ethernet (IEEE 100BASE-T1) port and a Fast Ethernet port. The converter features one DSUB9 (BroadR-Reach, CAN bus), one Fast Ethernet port with RJ-45 connector, and a Micro-USB connector. The BroadR-Reach channel is configurable as either Master or Slave by a switch button or programmatically, and the device can be powered either via DSUB connector or via USB.
- 100BASE-T1 (IEEE 802.3bw) to 100BASE-TX media conversion
- Master/Slave configuration for BroadR-Reach
- DSUB9 connector for T1, RJ-45 connector for Ethernet
- USB-powered or externally powered
- 6 status LEDs
- 2 DIP switches
- Automatic polarity detection for OABR Slave
- Media test for T1 cable – can detect a shortage, cut-off and impedance mismatch
- Table top or DIN-rail mount
The converter offers a possibility to access SMI registers of both transreceivers (PHYs) via a CAN bus or a USB’s virtual serial port. This enables the user to evaluate signal strength, detect polarity of the T1 port, carry out a BroadR-Reach media test to diagnose cable errors, fine-tune the PHYs parameters, and generally to read and write the registers.
Free PC application for Status Information
We offer a free-of-charge PC utility for reading status information out of the 100BASE-T1 Media Converter. Once you plug the Media Converter into computer’s USB port, the PC utility will show you converter’s port status, signal quality and T1 cable test result. This is useful for diagnostic and test purposes.
제조사 : Machsystem
납기 : 약 5 ~ 10 일
AS 방침 : 유상