The PCAN-Router Pro allows to join the data traffic from four High-speed CAN busses. The behavior of the router is configured via the CAN bus with the provided Windows program PPCAN-Editor. As well as pure forwarding, the CAN data can be processed, manipulated, and for example, filtered in a number of different ways. There are a variety of function blocks and other settings available to the user for configuration setup. Furthermore, there is a virtual fifth CAN channel which is used for recording all data traffic to a CompactFlash card.
As an alternative to the standard firmware which the PCAN-Router Pro is equipped with at delivery, custom firmware based on the ARM microcontroller NXP LPC2294 can be created and implemented. The scope of supply includes a library and the Yagarto GNU ARM toolchain (contains the GNU Compiler Collection GCC for C and C++).
CAN transceiver modules in the PCAN-Router Pro allow a flexible adaptation of each CAN channel to the requirements. For example, Low-speed and Single-wire CAN transceivers are also available on request.
The configuration or the transfer of the firmware via CAN requires a PEAK CAN interface.
Note about the programmability:
Since March 2013, a toolchain and a library are available for programming custom firmware for the PCAN-Router Pro. Please note that due to various hardware extensions only devices with a serial number from 100 can be equipped with custom firmware.
4 High-speed CAN channels via plugable transceiver modules. Alternatively, Low-speed, Single-wire, and opto-decoupled High-speed modules, as well as High-speed modules without wake-up function available
Wake-up function using separate input or CAN bus
Complies with CAN specifications 2.0 A/B
CAN connections are D-Sub, 9-pin
CAN termination switchable, separately for each CAN channel
CompactFlash card slot
Battery-buffered real-time clock (RTC), can also be used for wake-up
Status LEDs for CAN channels, CompactFlash card, microcontroller, and power supply
NXP microcontroller LPC2294
Aluminum casing with flange. DIN rail fixing option available on request
8 - 27 V power supply, protection against overvoltage and reverse polarity
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Properties of the standard firmware:
Detailed configuration with the software PPCAN-Editor 2 for Windows®
Various function blocks for data processing and manipulation
Configurable CAN channel status LEDs
Recording of CAN data and error frames to a CompactFlash card
Conversion of logging data to various output formats using Windows® software
제조사 : PEAK-System Technik GmbH (독일)
납기 : 약 5 ~ 10 일
AS 방침 : 구입 후 1년간 무상 (단, 사용자 과실의 경우 실비 청구), 1년 후 유상